Belton Road and line marker

Special paintwork for precise line markings on surfaces of all kinds, e.g. asphalt, concrete, earth, lawns, sand etc. Ideal for marking parking spaces, roads, storage rooms and for private purposes. Also suitable for absorbent and vertical surfaces. Clean overhead work thanks to 360° technology. Caution: Do not remove the spray cap!

Exact line markings. 360°

• Marking spray for precise line markings
• 360° technology makes working overhead possible
• Special fluorescent pigments in the can. Luminous even in low UV light.
• Caution! Do not remove the spray cap! 

Properties
Can be used on asphalt and concrete.
The spray can can be used at any angle thanks to the 360 ° valve. Do not remove the special cap
Special fluorescent pigments in the can. Luminous even in low UV light.
Note drying time of 20 min.
Binding agent base: Special binding agent combination
Spray application: as needed
Layer thickness: ca. 20 – 25 μm per layer
Spray distance: 15-25 cm
Drying times:

• Dust dry: after approx. 20 min.
• Fast-to-handling: after approx. 90 min.
• Dry hard: after approx. 12 hours

Can be painted over:

• With itself: at any time
• with all belton paints: at any time

Paint structure:
Asphalt / Concrete / Earth / Lawn
1.  belton Road and line marker

Article - No
323 570 fluorescent red ( 500 ml )
323 571 fluorescent yellow ( 500 ml )
323 572 signal white ( 500 ml )
 

► Note: Overhead working possible. Also for vertical surfaces because the paint dries quickly and does not drip