Belton Diamond effect

Special decorative spray that creates a twinkling diamond effect on various surfaces, indoors and outdoors. Ideal for decorative designs and upgrading. The diamond effect is especially effective on dark surfaces. After 30 min., be sure to topcoat with belton clear coat to achieve weather resistance.

Glitter and glamour.

  • For a twinkling diamond effect
  • Ideal for handicraft and decoration objects
  • Black pre-coat recommended
  • Weather resistant, for indoors and outdoors

Properties

Binding agent base:

  • Acrylic resin

Spray coating:

  • 2 evenly thin layer: 40-50 μm
  • Spray distance: 15-25 cm

Drying times:

  • Dust dry: after approx. 20 min.
  • Fast-to-handling: after approx. 60 min.
  • Dry hard: after approx. 24 hours

Can be painted over:

  • With itself: at any time
  • With clearcoat: after 30 min.

Paint structure:

  • Wood / wood based
    1. belton basic Universal primer
    2. Top coat (recommendation: belton spectRAL)
    3. belton special Diamond effect
    4. belton Clearcoat for all effects (optional)
  • Ferrous metals / Steel
    1. Auto-K Anti-corrosion primer (outdoor)
    belton basic Universal primer
    2. Top coat (recommendation: belton spectRAL)
    3. belton special Diamond effect
    4. belton Clearcoat for all effects (optional)
  • Plastics (paintable)
    1. belton basic Plastic adhesion primer
    2. Top coat (recommendation: belton spectRAL)
    3. belton special Diamond effect
    4. belton Clearcoat for all effects (optional)
  • Glass
    1. belton basic Universal primer
    2. Top coat (recommendation: belton spectRAL)
    3. belton special Diamond effect
    4. belton Clearcoat for all effects (optional)
Article – NO
323 201 gold ( 400 ml )
323 202 silver ( 400 ml )
323 203 multi color ( 400 ml )
► Note: Precoat the belton Diamant-Effekt with a topcoat in your desired color. (The darker the color the more intense the diamant effect). Afterwards apply belton Clearcoat for all effects. Please check the compatibility of plastic surfaces. All other surfaces, such as e.g. stone, clay, ceramics, glass, rattan/bast, card/paper need to be primed with belton universal primer. The surface to be painted must be clean, dry and free of grease.
Do not spray onto objects coated with artificial resin because the paint may lift.
CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the valve is empty.